← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: Main Positive battery Cable
From:craig cowan <phishman068@GMAIL.COM>
Date:Tue, 24 Aug 2010 20:43:08 -0400

I was told by an electrical guy that makes vanagon wiring harnesses that 1/0
was the way to go. I was going to buy it, then I saw that they wanted
$15/foot.....
In my case it was just a bad starter (luckily).

-Craig
'85GL turned WESTY
BOSTIG in the back
'87 SUNROOF Syncro

On Tue, Aug 24, 2010 at 7:59 PM, john <mreid157@xplornet.com> wrote:

> Like many of you I've been experiencing a sometimes slow cranking when hot
> in my 87 Westy. After reading lately about starter replacement not curing
> the problem and also Jonathan's main cable replacement curing his problem,
> I've decided I want to change my main positive battery cable.
>
> The cable itself measures almost 5/8 of an inch and the copper portion
> alone
> is close to 7/16 of an inch. When I look up the AWG chart this puts it at
> almost 000 wire size. Pretty big and expensive cable.
>
>
>
> I would like to know what you guys have been using as replacement cable and
> if #1 AWG wire would suffice. The #1 AWG wire will still run me about 5.90
> a
> foot at the local marine supply.
>
>
>
> I measured mine today and I figure I would need close to 11 feet to be
> safe.
>
>
>
> Hope you folks can give me some advice.
>
>
>
> John
>

← Previous in threadNext in thread →
Back to August 2010, week 4
Have something to add on this topic today? Revive this thread in the forum »